Tacker staples

Large selection for all applications.

We supply high-quality tacker staples. The choice of the right type of tacker staples is crucial for a stable join. That’s why we have the optimal staple for every common application. Using Novus quality staples guarantees that the staple and tacker fit together perfectly.

We offer fine wire staples for the least possible damage. Durable flat wire staples, narrow crown staples for panelling and high-quality stainless steel staples for tacker. The stapling result is professional, durable and resilient.

NOVUS fine wire staples A type 53
Filter
0,00 
Standard fine wire staple for hand-, electric-, accu- and airtackers, ideal for fastening of fabrics and textiles.
0,00 
Hammertacker fine wire staple for fastening of fabrics and textiles.
0,00 
Standard flat wire staple for hand-, electric- and pneumatic tackers for fastening of sheetings.
0,00 
Hammertacker flat wire staple for fastening of sheetings.
0,00 
Narrow crown staple, ideal for fastening ofe panels, tongue- and groove boards
NOVUS narrow crown staple C type 4

Fine wire staples

are mainly used for fastening fabrics. The thin staple causes minimal damage to the material.

NOVUS narrow crown staple C type 4

Flat wire staples

are particularly suitable for working with sheeting. The staple’s flat back fixes the sheeting and secures it against tearing.

NOVUS narrow crown staple C type 4

Narrow crown staples

are particularly used for panelling work with and without cladding clips.

NOVUS narrow crown staple C type 4

Tacker nails

are used to quickly fasten decorative trims and corner mouldings. Thanks to their tiny head, tacker nails are almost invisible.

The Novus staple quality.

Novus offers the right size and length of fasteners for every task. They are manufactured with the latest technology from the very best materials. Novus only uses steel wires with a galvanised surface – for high environmental compatibility and optimum rust protection.

The V2A stainless steel staples are particularly suitable for permanent outdoor use. From a length of 8 mm, only hard wire is used. The term “super-hard” denotes a steel wire of the highest strength and thus documents the staple’s stability.

The right staple for your tool!

Find the right staple for your tacker in our staple finder. Even if you don’t have a Novus tacker, we’ll tell you which of our staples to use!

zum staplefinder

This is how
the staple holds best

You're always sure of good results with the right staple length. So you should use 1/3 staple length for the fastening material, and we recommend 2/3 staple length for the anchoring material. If you are using a hardwood as the anchoring material, a 1/1 ratio is enough.

NOVUS narrow crown staple C type 4

Why use branded staples?

Because any chain is only as strong as its weakest link. And when it comes to tacker, that’s often the fastener. Only fasteners made by brand manufacturers continuously meet the high standards of quality required to achieve perfect tacking results.

NOVUS narrow crown staple C type 4

High-quality branded fasteners are defined by the following criteria:

  • Perfectly accurate sizing so fasteners slide smoothly through the tacker’s staple magazine

  • The right amount of adhesive to ensure the staple bar doesn’t break apart but individual staples separate easily when tacking

  • Sufficiently firm wire for clean perforation of the material you want to tack

Using staples that fail to meet even one of these quality criteria may limit the functionality of your tacker.

The above criteria are especially important when working with high-impact devices, because fasteners that do not meet quality criteria such as sufficiently firm wire will be unable to withstand the high forces that may occur when tacking. Use Novus tacker staples labelled “superhard” to be on the safe side!

Implementing creative ideas with tacking staples

NOVUS narrow crown staple C type 4

Upholstering chairs

With fine wire staples, fabrics and padding can be securely fastened with minimal damage when restoring chairs.

Go to the workshop

NOVUS narrow crown staple C type 4
NOVUS narrow crown staple C type 4

Making seat cushions

We’ll show you how to kit out garden benches with padded cushions. Our fine wire staples provide a secure hold.

Go to the workshop

NOVUS narrow crown staple C type 4

Building a cold frame

A made-to-measure cold frame is quickly built with a tacker and the appropriate flat wire staples. Do it yourself for the garden.

Go to the workshop

NOVUS narrow crown staple C type 4
NOVUS narrow crown staple C type 4

Creating a mini-pond

A small mini-pond transforms a terrace or balcony into an idyll. Flat wire staples are ideal for attaching sheeting.

Go to the workshop

Our fasteners are just the job.

Novus offers the right size and length of fasteners for every task. Discover the advantages of flat wire staples in the video!

Narrow crown staples are just the job for panelling.

And the Novus J-165 is the perfect tacker for working with narrow crown staples. Discover the advantages for wood and panelling work in the video!

Compare Products